Orlando Startup Hoverfly Technologies: The $20 Million Series B and the Components Bet It Built
After closing a $20 million Series B in October 2025, Sanford’s Hoverfly Technologies launched a division in June 2026 to sell parts to other drone makers as Pentagon sourcing rules tighten.
4 minute read
For a defense or security customer that needs to keep watch for as long as a mission requires, a tethered drone offers a way to stay in one place. It rises on a cable that carries power and data, then holds its position. In Sanford, Hoverfly Technologies built a business around that kind of surveillance. In October 2025, the Seminole County maker of tethered unmanned aerial systems closed the largest capital raise in its history. Over the following year, it put the money to work building a second business. The dates of those steps come from the company’s announcements.
The round, dated to its announcement
Hoverfly announced on October 8, 2025, that it had closed a $20 million Series B round led by an existing investor, Leonardo DRS, and a new partner, Korea Robot Manufacturing (KRM). Leonardo DRS, Inc. (Nasdaq: DRS) invested $15 million, and KRM invested $5 million. As part of the investment, Hoverfly signed a manufacturing agreement with DRS to expand production of its Hoverfly Sentry system and start a new production line for its Hoverfly Spectre system. Both investors became official resellers and integrators of the two platforms.
“Our continued investment in Hoverfly Technologies reflects our unwavering confidence in their innovative tethered drone solutions,” said Aaron Hankins, senior vice president and general manager of the Leonardo DRS Land Systems Business Unit and a member of the Hoverfly board, in the announcement. KRM’s chief executive, Kwangsik Park, said, “Partnering with Hoverfly enables us to establish a U.S.-based supply chain for critical UAV components — a strategic move aligned with national security priorities, especially amid restrictions on imports from traditional high-risk regions.” KRM became Hoverfly’s exclusive manufacturer of key components and its preferred vendor for future component needs. The two companies planned to partner on a new U.S. facility to make key components domestically.
Hoverfly said it had sold more than 800 tethered drones to U.S. and allied defense customers and described the Spectre as the only tethered drone on the Defense Innovation Unit’s Blue List. The newest capability named in the release was NEXUS (Network Extension of Unmanned Systems), which Hoverfly said the U.S. Army had adopted in concept and which had been demonstrated alongside industry partners.
What the round built: a components division
By June, Hoverfly was selling some of the parts that go into drones. On June 24, 2026, it announced Hoverfly Elements, a division selling NDAA-compliant components to defense and commercial manufacturers that it unveiled at Xponential 2026. Its first products were drone motors and electronic speed controllers in a Motors suite powered by KRM, and GPS modules developed with Septentrio, a Hexagon company. Hoverfly said the modules offered multi-band, multi-constellation positioning with anti-jamming and anti-spoofing features.
Hoverfly’s case for the new business rests on where drone makers can buy their parts. In its release, the company said the Pentagon’s Drone Dominance Program Supply Chain Framework requires manufacturers in $6.6 billion of small-UAS procurement to shift component sourcing away from non-covered countries in phases. The requirements go from assembly-level compliance in August 2026 to full domestic traceability by August 2027, Hoverfly said. The company said its Elements motors met Phase 2 requirements at launch and that it had a plan to move production onshore to meet later phases. It cited a U.S. drone components market valued at approximately $5.9 billion in 2025 and projected to exceed $14.4 billion by 2033. Hoverfly attributed that projection to federal demand for verified, non-Chinese supply chains.
“Xponential confirmed what we already knew: the market is urgently looking for exactly what we’ve built,” said Steve Walters, chief executive of Hoverfly Technologies, in the June announcement. The company’s plans call next for tether kits for persistent operations and custom component design for other drone manufacturers.
The open questions
Neither announcement gives a headcount, a Sanford street address or a valuation. The two releases also leave open where the U.S. components facility that KRM and Hoverfly described in October 2025 would be built and when it would open. In the meantime, the Sanford company that sold tethered drones to defense customers has used $20 million from a prime contractor and a Korean manufacturer to start selling parts to other drone builders. Those builders now have to find suppliers that meet the sourcing rules. This desk will continue to follow how that business develops.
Related coverage: Red 6 and the defense-simulation cluster around UCF; Plug and Play picks 11 semiconductor startups for NeoCity Batch 4; Hernon Manufacturing’s $2.8 million Sanford expansion.
More from the Startups & Entrepreneurs desk: the Startups hub and the Startups & Entrepreneurs archive.
Sources & notes
Hoverfly Technologies Inc., PR Newswire announcements of October 8, 2025 (the $20 million Series B close; Leonardo DRS $15 million; KRM $5 million; the DRS manufacturing agreement for Sentry and Spectre; the reseller/integrator roles; the KRM exclusive-manufacturer and U.S.-facility terms; the more-than-800-drones-sold figure; the Blue List characterisation; NEXUS; the Hankins, Park and Walters quotations) and June 24, 2026 (the Hoverfly Elements launch at Xponential 2026; Motors powered by KRM; GPS modules with Septentrio; the Drone Dominance Program framework figures and phase dates; the $5.9 billion / $14.4 billion market projection the company cites; the Walters quotation; the tether-kit and OEM roadmap), both read in full this run. The Series B is an October 2025 round and is dated as such throughout, however often later coverage re-surfaces it. Market-size and framework figures are reported as the company’s announcements present them. No valuation, revenue, headcount or street address is published in either release, and none is asserted here.
Photo: Orlando Citizen media library — site photography via the Red 6 story (red-6-orlando-startup-f16-atars-defense-simulation).
Orlando Citizen by email
The weekly edition, in your inbox
One email, every Saturday: the week’s edition of Orlando Citizen — the week’s stories, rankings and winners, gathered in one place. Free, and you can unsubscribe at any time.
Editor’s Picks
Spotted an error? Tell us — corrections · How we rank
